UK Out of stock! Genuine FSP FSP150-A54C1401 Ac Adapter 54v 2.78A Power Supply Molex 4 Pin

This ac adapter FSP54V2.78A150W-Molex-4Pin may be fit for the following models ( Customer offered ):
CISCO CBS350, CBS350-8FP-2-E-G, CBS350-8FP-E-2G, Aer2200

Do not use low quality ac adapter?

Why choose this UK Out of stock! Genuine FSP FSP150-A54C1401 Ac Adapter 54v 2.78A Power Supply Molex 4 Pin

UK Out of stock! Genuine FSP FSP150-A54C1401 Ac Adapter 54v 2.78A Power Supply Molex 4 Pin

• This ac adapter have short circuit protection, overheat protection circuit
• This ac adapter have very clean output, which can protect cpu, hard disk,video card and all the device.
• This ac adapter have a very good heat dispersion, that's means it is very safe when you use it for a long time.
• This genuine laptop ac adapter will longer your laptop battery life.
• It is a genuine ac adapter.

How to choose this UK Out of stock! Genuine FSP FSP150-A54C1401 Ac Adapter 54v 2.78A Power Supply Molex 4 Pin

1. Your original adapter output volt is 54V.
2. Your original adapter output Current is 2.78A.
3. Make sure its DC tips size is the same as your original.

F.A.Q: Why is my old adapter easy to become very hot, But a new genuine 54V 2.78A Ac Adapter will not?

1. Your machine use external alternating current (AC) adapter, which converts high voltage alternating current into low voltage, stable current. Adapters of this type can be too hot to be touched.
2. The 54V 2.78A AC adapter include two circuits to ensure a constant power supply device adapted to the computer or others. A transformer reduces the voltage, but a regulator provides a constant electricity, without "noise". These circuits use a small amount of electricity and generate a small amount of heat. The 54V 2.78A AC adapters usually feels a little warm. They can be warmer when the device is using a lot of electricity, for example whether it is running and charging the battery. There is no reason to worry about an adapter if it is too hot to touch comfortably.
3. Adapters sometimes overheated because the circuitry in them, such as the regulator, are malfunctioning. If the part is bad, it can produce excessive heat and must be replaced. The device itself can sometimes take too much current from the adapter, increasing the current passing through it, so it will be too hot.
4. 54V 2.78A AC adapters are based on air passing over them to dissipate heat and cool them. If the adapter is covered, such as a blanket or rug, the excess heat is trapped and then the adapter will overheat. Ensure to keep the adapter from obstacles. If ventilation is adequate, will remain at a moderate temperature.
5. If you use a low quality replacement 54V 2.78A ac adapter, It may not have a heat-dissipating aluminum plate inside.
6. If your 54V 2.78A adapter has only recently become very hot, it may be malfunctioning and you need to change it to avoid damage to the internal components of the machine.
7. Buy this original 54V 2.78A ac adapter is usually not easy to heat, because it is designed with good heat dissipation performance in mind, And it has passed many safety and quality certifications.

Search Tips:

• Need ' CHICONY 19.5V 11.8A Adapter ' ------- Just Seach with " CHICONY 19.5V 11.8A " Or " CHICONY19.5V11.8A ".
• Need 'PHILIPS ADPC1938 AC Adapter' ------- Just Seach with " ADPC1938 ".
• Need 'Ac Adapter for ACER ES1-521-25Q6 Laptop' ------- Just Seach with " ES1-521-25Q6 ".
• Need 'Ac Adapter for Samsung LS22A350HS/EN Monitor' ------- Just Seach with " LS22A350HS/EN ".
• Need 'Ac Adapter for Samsung HW-F550 SoundBar' ------- Just Seach with " HW-F550".
• Have item number (Model / PN) ------ Search with "Item number (Model / PN)".
• Have Machine Model (Number / PN) ------ Search with "Machine Model (Mumber / PN)".
• 'Brand' is not needed when you search.
• Just show us some picture of your orignal ac adapter that we can help find it from the factory, adapter supplier or the market if didn't get search result in our shop.